5 reasons to swap cardboard on pallets for anti-slip paper on reels

Corrugated cardboard is a heavy-duty paper material which is still used in many palletizing lines worldwide. Corrugated cardboard is used as an interlayer in the palletizing of pallet goods in order to stabilise goods during transport, internally and on the roads. However, corrugated cardboard sheets require quite a bit of unnecessary and cumbersome handling, which can end up being very costly. Therefore, we have identified 5 reasons for why you should swap your corrugated cardboard sheets with anti-slip paper on reels.

1. Anti-slip paper on reels frees up storage space

Sheets of corrugated cardboard are often precut to pallet sizes and generally come in pallets of 500-600 sheets. The relatively low number of corrugated cardboard sheets per pallet means that new sheets must be purchased more often, requiring extra space during transport and therefore also in storage, putting a financial strain on your business. Furthermore, there’s no getting around the fact that the sheet store must be refilled more frequently.

With anti-slip paper reels you can reduce your freight costs and need for storage space while also reducing your environmental impact. You can reduce your storage space by up to 90% as there are up to 5,000 sheets per reel. Additionally, the reels also have a diameter of 800-1000 mm and therefore last longer than corrugated cardboard on pallets, meaning less downtime due to having to refill the sheet store.

2. Corrugated cardboard on pallets requires a lot of storage space

If your palletizer serves several different pallet sizes, your storage space might be full of pallet sheets in individual sizes. Pallet sheets – particularly in individual sizes – require additional storage space, which can be a costly affair.

With a Palcut solution – anti-slip paper on reels in combination with a Palcut sheet dispenser, you will be able to free up storage space, as the dispenser cuts the sheets to size as needed. Moreover, the reels of anti-slip paper take up as little as a fifth of the space taken up by corrugated cardboard sheets.

3. Increase efficiency with a Palcut Solution

“We’ve increased productivity by at least 15% using Palcut’s automatic sheet dispenser solution,” says Kim Bøgh, production manager at Arla Foods, after switching from corrugated cardboard to anti-slip paper on reels and a Palcut sheet dispenser.

As the stack of sheets becomes smaller, the robot may slow down as it must continuously assess the distance to the next sheet of interlayer.

With a Palcut sheet dispenser, there is always just one sheet ready for the robot on the pickup table. The pickup position will always be at the same height, and the robot can therefore maintain its fast operation.

4. Avoid sheet waste due to incorrect pickup

Often, the robot may lift several sheets at a time as a result of suction passing through the sheets. This can result in sheet waste, either due to the robot palletizing with twice the normal number of interlayer sheets or due to the robot dropping the excess sheets, which can trigger a time-consuming production stop/emergency stop.

With anti-slip paper and a Palcut sheet dispenser, you can completely eliminate the risk of your intermediate sheets being wasted as a result of the robot’s powerful suction. The Palcut solution ensures that only one sheet is produced at once, which is ready for the robot on the pickup table. The sheets are automatically cut as required, straight from the reel. The sheet dispenser can work incredibly fast so the robot is able to continuously maintain the same speed.

5. Eliminate time-consuming changeovers

When the sheet store of corrugated cardboard sheets needs replacing – either because it’s empty or because the palletizer needs to run a different pallet size – the system must be stopped before the replacement can be made for security reasons. This is time-consuming, and also costs money every minute the palletizer is unnecessarily inactive.

With anti-slip paper on reels, you can switch between pallet sizes via the Palcut sheet dispenser’s control panel. If the paper roll is placed outside the robot’s working area, the roll can also be changed without having to stop the palletizing. This way, you can reduce changeover time and achieve non-stop palletizing by switching to anti-slip paper on reels.

Read about how Vital Petfood Group eliminated changeover time here.

A non-slip solution that works

Our anti-slip paper on reels has a high-friction surface, which means that goods are even more secure during transport than when using corrugated cardboard. At the same time, the paper’s great friction means that you can reduce the amount of stretch wrap around the palletized goods. In addition, the reels of anti-slip paper are delivered with up to 5 times more paper than corrugated cardboard sheets on pallets.

This means that:

1) You don’t have to order palletizing paper as often as you used to.

2) You free up storage space, as the paper reels can take up as little as a fifth of the space.

3) Changeover time is reduced, as the paper needs refilling less often because the reels last longer.

4 ) You are guaranteed maximum uptime with a Palcut solution.

Before you think that switching to anti-slip paper on reels will require major and costly restructuring of your current palletising setup, you should know that a Palcut sheet dispenser can easily be installed where your sheet storage used to be. In fact, the machine only requires 240 volts in order to work in the old workspace.

Still not convinced?

Then you also have the possibility to try out our standard Palcut sheet dispenser for a three-month free trial.

And, contrary to our expectations, if you don’t want to carry on beyond the trial period, your only cost will have been paper consumption.

Contact us today – and let’s find the right solution for you.

info@palcut.com – Tel: +45 9613 3110 – www.palcut.com/contact